Macro Operations (Menu); Creating And Editing A Macro - Sony XVS-G1 User Manual

2
Enable auto insert mode.
Note
Registers cannot be merged when auto insert mode is
disabled.
3
Recall a register to merge.
Recall a macro register using one of the following
buttons.
• Buttons with a set macro attachment (see page 253)
• Cross-point buttons in the cross-point control block
(see page 249)
• Memory recall buttons in the utility control block
(see page 249)
All events in the recalled register are inserted after the
selected event.

Macro Operations (Menu)

Macro edit mode
You can create and edit a macro using the Home > Register
> Macro > Edit Macro menu (18307.11).
Multiple simultaneous web menu session connections are
supported, but only one web menu session can edit a macro
at any given time.
When an operation that would invoke edit mode is
performed while editing a macro in another menu session,
the macro being edited in the other menu session is saved
and then the mode switches to edit mode.
In macro edit mode, the following information is displayed
in the header area.
Macro Menu Enbl: When auto insert mode is disabled
during macro editing
Macro Auto Ins: When auto insert mode is enabled
during macro editing
Menu operations performed in macro edit mode are
registered in a macro as an event.
Notes
• A macro cannot be created/edited using the menu when
the Flexi Pad control block macro operation mode is in
edit mode.
• When executing a macro, if you switch to macro edit
mode, the macro currently being executed stops.
• A macro cannot be executed while creating/editing a
macro.
• Multiple simultaneous web menu session connections
are supported, but only one of the following pop-up
windows can be displayed at any given time.
Whenever any pop-up window is displayed, the window
previously opened using another menu session is closed.
- [Recall/Store Register] window:
Displayed using the [Recall/Store] button on the
[Effect Timeline Recall/Store] taskbar, [Effect
Timeline Edit] taskbar, or [Snapshot] taskbar
- [Edit Timeline] window:
Displayed using the [All Edit Options] button on the
[Effect Timeline Edit] taskbar
- [Edit Macro Event] window:
Displayed using the [All Edit Options] button in the
[Edit] group in the Home > Register > Macro > Edit
Macro menu (18307.11)

Creating and Editing a Macro

1
Open the Home > Register > Macro > Edit Macro
menu (18307.11).
242