Editing A Macro Register - Sony XVS-G1 User Manual

3
In the event list, select the event at the insertion
position.
4
Press the [Paste Before] button or [Paste After] button
in the [Edit Macro Event] window.
The copied event is inserted before or after the selected
event.
Note
You can also select and copy multiple events.
For details, see "Selecting multiple events"
(page 246).
Merging registers
You can insert all events from another register at a
specified position.
1
In the event list, select the event at the insertion
position.
2
In the [Edit Macro Event] window, press the [Merge]
button.
3
Enter the number of a register to merge in the numeric
keypad area.
4
Press [Enter].
All events in the register are inserted after the selected
position.
Selecting multiple events
You can select multiple events as the edit target.
This operation is enabled only when modifying (using
control panel operation only), deleting, or copying an
event.
To select all events
In the [Edit Macro Event] window, set the [All] button to
the on state.
To select multiple events within a specified range
1
In the event list, select the first event for a specified
range.
2
In the [Edit Macro Event] window, press the [From
To] button.
"From XXX To" ("XXX" is the current event number)
is displayed on the numeric keypad area display.
3
Enter the number of the last event for the specified
range in the numeric keypad area.
To change the number of the first event in the specified
range, press [Clear]. Enter the number of the first
event, press [Enter], and then enter the number of the
last event.
Enter a "." (period) to specify a range from the first
event to the last event.
4
Press [Enter].
The specified range is applied.
Undoing an edit operation
To undo an operation immediately after inserting,
modifying, or pasting an event, press the [Undo] button in
the [Edit Macro Event] window.

Editing a Macro Register

You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Displaying a macro register
Open the Home > Register > Macro > Edit Register >
Browse menu (18307.21).
You can check the following information.
• Register number
• Register name
• Lock icon
A lock icon is displayed when a register is locked.
• Editing icon
A " " icon is displayed when a register is being edited.
When the [Edit Macro] button is pressed, the Home >
Register > Macro > Edit Macro menu (18307.11) is
recalled.
For details, see "Creating and Editing a Macro"
(page 242).
Copying a register
Notes
• An empty register cannot be copied.
• A locked register cannot be copied.
1
Open the Home > Register > Macro > Edit Register >
Copy/Move/Swap menu (18307.22).
A list of copy source registers is shown on the left, and
a list of copy destination registers is shown on the
right.
2
In the list on the left, select a copy source register.
246