Cross-Point Control Block - Sony MVS-6000 User Manual

Cross-Point Control Block

In the cross-point control block, you can
select the signals to be used in this M/E
bank or PGM/PST bank.
2 Source name displays
Key row
Background A row
1 Cross-point buttons
a Cross-point buttons
These buttons select the signals used for
video creation on this M/E bank or PGM/
PST bank. Each row of buttons corresponds
to one or more signal buses within the
switcher.
Key row: The buttons in this row select the
bus signals specified with the key row
delegation buttons ([DSK1] to [DSK4],
[DME1] to [DME2] or [UTIL]) or
delegation buttons in the auxiliary bus
control block.
36
Names and Functions of Parts of the Control Panel
Key row delegation buttons
DSK1 DSK2 DSK3 DSK4 DME1
Background B row
DME2 UTIL
The later pressed delegation button
takes precedence and the selection is
reflected in the key row.
Background A row: Press the desired
button to select the signal as the current
background video on this M/E bank or
PGM/PST bank.
Background B row: Press the desired
button to select the signal as the
background after the next transition on
this M/E bank or PGM/PST bank.
4 XPT HOLD button
5 SHIFT button
XPT
SHIFT
HOLD