Cross-Point Control Block - Sony MVS-8000 User Manual

Cross-Point Control Block

In the cross-point control block, you can
select the signals to be used in this M/E
bank or PGM/PST bank.
There are also modules without the source
name displays shown in the following
figure.
Key 2 row
Key 1 row
Background A row
5 Source name displays
a Cross-point buttons
These buttons select the signals used for
video creation on this M/E bank or PGM/
PST bank. Each row of buttons corresponds
218
Names and Functions of Parts of the Control Panel
1 Cross-point buttons
SHIFT
SHIFT
SHIFT
SHIFT
Background B row
6 SHIFT button
All operations except those of the [SHIFT]
button are the same as for a module with
source name displays.
Reentry buttons
7 M/E bank display
3 Key bus selection buttons
M/E M/E M/E XPT
KEY3
1 2 3 HOLD
M/E M/E M/E XPT
KEY4
1 2 3 HOLD
PRE POST
SHIFT
MCRO MCRO
MCRO
M/E M/E M/E XPT
ATTCH
1 2 3
HOLD
ENBL
M/E M/E M/E XPT
UTIL
1 2 3
HOLD
4 UTIL button
2 XPT HOLD buttons
Reentry buttons
to one or more signal buses within the
switcher.
Key 1 row: The buttons in this row select
the key 1 or key 3 signals to be inserted
8 Macro buttons