P07--Hmi - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD
Function
Name
code
P06.26
Lower limit of
P06.27
HDO output
Corresponding
P06.28 HDO output of
lower limit
Upper limit of
P06.29
HDO output
Corresponding
P06.30 HDO output of
upper limit
HDO output filter
P06.31
time
P06.32 Reserved
Frequency reach
P06.33
detection value
Frequency reach
P06.34
detection time
P07––HMI
Function
Name
code
P07.00 User password
Description
-300.0%–P06.29
0.00–50.00kHz
P06.27–300.0%
0.00–50.00kHz
0.000s–10.000s
0–65535
0–P00.03
0–3600.0s
Description
0–65535
Set it to any non-zero value to enable password
protection.
00000: Clear the previous user password and
disable password protection.
After the user password is set and takes effect,
you cannot enter the parameter menu if you enter
an incorrect password. Please remember your
password and save it in a secure place.
After you exit the function code editing interface,
the password protection function is enabled within
1 minute. If password protection is enabled,
"0.0.0.0.0" is displayed when you press the
PRG/ESC key again to enter the function code
editing interface. You need to enter the correct
user password to enter the interface.
Note: Restoring the default values may delete the
-169-
Function parameter list
Default
Modify
value
○
0.00%
○
0.00kHz
○
100.0%
50.00
○
kHz
○
0.000s
●
0
○
1.00Hz
○
0.5s
Default
Modify
value
○
0