P28--Master/Slave Control Functions - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD
P28––Master/slave control functions
Function
Name
code
Master/slave
P28.00
mode selection
Master/slave
P28.01 communication
data selection
Master/slave
P28.02
control mode
P28.03 Slave speed gain 0.0–500.0%
P28.04 Slave torque gain 0.0–500.0%
P28.05 Master/slave
mode 2 speed
mode / torque
mode switching
frequency point
P28.06 Number of slaves 0–15
P28.07–
Reserved
P28.29
Description
0: The master/slave control is invalid
1: This machine is a master
2: This machine is a slave
0: CAN
1: Reserved
Ones: Master/slave running mode selection
0: Master/slave mode 0
(The master and slave adopt speed control and
maintains the power balance by droop control)
1: Master/slave mode 1
(The master and slave must be in the same type of
vector control mode. The master is speed control,
and the slave will be forced to be in the torque
control mode.
2: Master/slave mode 2
Start in the slave first speed mode (master/slave
mode 0) and then switch to torque mode at a
certain frequency point (master/slave mode 1)
Tens: Slave start command source selection
0: Follow the master to start
1: Determined by P00.01
Hundreds: Slave transmitting/master receiving
data enable
0: Enable
1: Disable
0.00–10.00Hz
0–65535
-236-
Function parameter list
Default
Modify
value
◎
0
◎
0
◎
0x001
○
100.0%
○
100.0%
○
5.00Hz
◎
1
○
0