INVT Goodrive350 Series Operation Manual page 231

Goodrive350 series high-performance multifunction VFD
Function
Name
code
Speed of spindle
P22.01
orientation
Deceleration time
P22.02 of spindle
orientation
Spindle zeroing
P22.03
position 0
Spindle zeroing
P22.04
position 1
Spindle zeroing
P22.05
position 2
Description
1: Near-by direction positioning
Bit5: Positioning mode selection 2
0: Forward positioning
1: Reverse positioning
Bit6: Zeroing command selection
0: Electric level mode
1: Pulse mode
Bit7: Reference point calibration mode
0: Calibrate at the first time
1: Calibrate in real time
Bit8: Action selection after zeroing signal
cancellation (electric level type)
0: Switch to speed mode
1: Position lock mode
Bit9: Positioning completion signal selection
0: Electric level signal
1: Pulse signal
Bit10: Z pulse signal source
0: Motor
1: Spindle
Bit11–15: Reserved
During spindle orientation, the speed of the
position point of orientation will be searched, and
then it will switch over to position control
orientation.
Setting range: 0.00–100.00Hz
Deceleration time of spindle orientation.
Spindle orientation deceleration time means the
time needed for the VFD to decelerate from Max.
output frequency (P00.03) to 0Hz.
Setting range: 0.0–100.0s
You can select the zeroing positions of four
spindles by terminals (function code 46, 47).
Setting range: 0–39999
Setting range: 0–39999
Setting range: 0–39999
-222-
Function parameter list
Default
Modify
value
○
10.00Hz
○
3.0s
○
0
○
0
○
0