Fault Alarm Display State; Keypad Operation; Enter/Exit Menu - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD
16:02:35 Forward
DC bus voltage
P17.11 V
Digital input terminal state
P17.12
Digital output terminal state
P17.13
Monitoring
Under running state, multiple kinds of state parameters can be displayed. The running display
parameter list is user defined, and each state variable function code can be added to the running
display parameter list as needed. The state variable which has been added to the running display
parameter list can also be deleted or shifted.

5.3.3 Fault alarm display state

The VFD enters fault alarm display state once fault signal is detected, and the keypad displays fault
code and fault information with TRIP indicator on the keypad turning on. Fault reset operation can be
carried out via STOP/RST key, control terminal or communication command.
The fault code will be kept displaying until fault is removed.

5.4 Keypad operation

Various operations can be performed on the VFD, including entering/exiting menu, parameter
selection, list modification and parameter addition.

5.4.1 Enter/exit menu

Regarding the monitoring menu, the operation relation between entering and exiting is shown below.
16:02:35 Forward Local Ready
Set frequency
50.00
P17.00 Hz
DC bus voltage
540.0
P17.11 V
Digital input terminal state
0x0000
P17.12
Monitoring About
Regarding the system menu, the operation relation between entering and exiting is shown below.
Local Ready 01: GD350
540.00
0x0000
0x0000
About
Menu
Figure 5.6 Running parameter display state
16:02:35 Forward Local
Type of present fault:
Fault code：
19：Current detection fault (ItE)
Return
Figure 5.7 Fault alarm display state
16:02:35
01: GD350
Standard monitoring setup
Return
Menu
Figure 5.8 Enter/exit menu diagram 1
16:02:35
DC bus voltage
V
0.0
Return
Fault
19
Homepage
Forward Local Ready 01: GD350
Homepage
Select
-37-
Basic operation instructions
Forward Local Ready
540.00
2000.0
Homepage
01: GD350
Confirm
Forward
16:02:35
Stop state display parameter
Running state display parameter
Return Homepage
01: GD350
Local Ready 01: GD350
Select