T16B Ch.n Comparator/Capture M Control Register - Epson S1C31D50 Technical Manual

T16B Ch.n Comparator/Capture m Control Register

Register name Bit
T16B_nCCCTLm 15
14–12 CBUFMD[2:0]
11–10 CAPIS[1:0]
9–8 CAPTRG[1:0]
7
6
5
4–2 TOUTMD[2:0]
1
0
Bit 15 SCS
This bit selects either synchronous capture mode or asynchronous capture mode.
1 (R/W): Synchronous capture mode
0 (R/W): Asynchronous capture mode
For more information, refer to "Comparator/Capture Block Operations - Synchronous capture mode/
asynchronous capture mode." The T16B_nCCCTLm.SCS bit is control bit for capture mode and is in-
effective in comparator mode.
Bits 14–12 CBUFMD[2:0]
These bits select the timing to load the comparison value written in the T16B_nCCRm register to the
compare buffer. The T16B_nCCCTLm.CBUFMD[2:0] bits are control bits for comparator mode and
are ineffective in capture mode.
Table 17.7.3 Timings to Load Comparison Value to Compare Buffer
T16B_nCCCTLm.
Count mode
CBUFMD[2:0] bits
0x7–0x5
0x4 Up mode
Down mode
Up/down mode When the counter becomes equal to the comparison value set previously
0x3 Up mode
Down mode
Up/down mode When the counter becomes equal to the comparison value set previously or
0x2 Up mode
Down mode
Up/down mode
0x1 Up mode
Down mode
Up/down mode When the counter reaches 0x0000 or the MAX value
0x0 Up mode
Down mode
Up/down mode
Bits 11–10 CAPIS[1:0]
These bits select the trigger signal for capturing (see Table 17.7.4). The T16B_nCCCTLm.CAPIS[1:0]
bits are control bits for capture mode and are ineffective in comparator mode.
Bits 9–8 CAPTRG[1:0]
These bits select the trigger edge(s) of the trigger signal at which the counter value is captured in the
T16B_nCCRm register in capture mode (see Table 17.7.4). The T16B_nCCCTLm.CAPTRG[1:0] bits
are control bits for capture mode and are ineffective in comparator mode.
S1C31D50/D51 TECHNICAL MANUAL
(Rev. 2.00)
Bit name Initial
SCS 0
0x0
0x0
0x0
– 0
TOUTMT 0
TOUTO 0
0x0
TOUTINV 0
CCMD 0
When the counter becomes equal to the comparison value set previously
Also the counter is reset to 0x0000 simultaneously.
When the counter becomes equal to the comparison value set previously
Also the counter is reset to the MAX value simultaneously.
Also the counter is reset to 0x0000 simultaneously.
When the counter reverts to 0x0000
When the counter reverts to the MAX value
when the counter reverts to 0x0000
When the counter becomes equal to the comparison value set previously
When the counter reaches the MAX value
When the counter reaches 0x0000
At the CLK_T16Bn rising edge after writing to the T16B_nCCRm register
Seiko Epson Corporation
17 16-BIT PWM TIMERS (T16B)
Reset R/W
H0 R/W –
H0 R/W
H0 R/W
H0 R/W
– R
H0 R/W
H0 R/W
H0 R/W
H0 R/W
H0 R/W
Comparison Value load timing
Reserved
Remarks
17-29