Table of Contents
Advertisement
18 IR REMOTE CONTROLLER (REMC3)
Bits 15–9 Reserved
Bit 8
OUTINVEN
This bit inverts the REMO output polarity.
1 (R/W): Inverted
0 (R/W): Non-inverted
For more information, see Figure 18.4.3.1.
Bits 7–1
Reserved
Bit 0
CARREN
This bit enables carrier modulation.
1 (R/W): Enable carrier modulation
0 (R/W): Disable carrier modulation (output data signal only)
Note: When carrier modulation is disabled, the REMC3DBCTL.REMOINV bit should be set to 0.
18-12
Seiko Epson Corporation
S1C31D50/D51 TECHNICAL MANUAL
(Rev. 2.00)
Advertisement
Table of Contents
