Installing The Unit; Installation Environment; Installation Environmental Conditions For Installation - MUTOH ValueJet 1304 User Manual

Chapter 3
This chapter explains how to handle this printer.
3.1

Installation environment

3.1.1

Installation environmental conditions for installation

Note
Do not open the front cover during printing.

If the front cover is opened, printing will be interrupted.
Printing restarts if you close the front cover. However, you are not guaranteed
to have high print quality.
Be sure to read and understand the safety warnings before handling the printer.
Floor strength of the installation place
Power specifications
Environmental
conditions
Note
Concerning temperature and humidity, avoid:

Places where temperature or humidity may rapidly change, even though within the

required conditions.
Places that receive direct sunlight, increased illumination or direct air, for example

from an air conditioner.
To keep the temperature and humidity constant, install this product in a

location where the air condition is adjustable.
AP-75780 - Revision 1.3

Installing the unit

More than 2940 Pa (300 kg/m²)
Power supply AC 90 V - 120 V
Frequency range 50/60Hz
Power capacity 10A or more
Temperature: 20°C to 32°C
Operative condition
Humidity: 40% to 60%, No condensation
Guaranteed range of Temperature: 20°C to 32°C
printing accuracy Humidity: 40% to 60%
Temperature: Within 2°C per hour
Change rate
Humidity: withing 5% per hour
Temperature: -20°C to 60°C
Archiving
Humidity: 20% to 80%
environment
no condensation
User's Guide ValueJet 1304
Installing the unit
25
3