User's Guide Kona cutting plotter
Basics
3.2
Installing firmware
3.2.1
Normal procedure
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
30
Make a connection between the Kona cutting plotter and your computer using a
USB cable (standard in-the-box item).
Be sure that the USB driver is already installed!
Refer to
Uninstall/update USB drivers on page 29
Power ON the cutter and computer.
Be sure that the pressure rollers are raised.
Download the latest firmware from
the Kona cutting plotter installation CD.
Double click on the exe file.
Press next.
Read the License Agreement and select I accept the agreement and press next.
> window drivers or insert
Mutoh's member Site
AP-75380 - Revision 1.2