Software And Drivers; Download Latest Software And Drivers; Firmware Installation - MUTOH Kona 760 Service Manual

Service manual Kona cutting plotter
Adjustments and calibrations
4.2

Software and drivers

4.2.1

Download latest software and drivers

Always download the latest firmware from Mutoh's firmware download FTP.
Link
User account
Password
4.2.2

Firmware installation

Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
94
ftp://firmware@ftp.mutoh.be/firmware_download
firmware
download
Make a connection between the Kona and your computer using a USB cable. Be
sure that the USB driver has been installed yet!
Power ON the cutter and computer.
Launch the exe file you have downloaded.
Press next.
Read the License Agreement and select I accept the agreement and press next.
Click Install to continue.
The program will extract the files.
Select the ComPort on which the cutter is connected and press Apply.
The PC will send the new firmware to the cutter.
When the file is sent, the programming will start. 
Be sure NOT to shut down the cutter during this routine!
The Kona will restart automatically as soon as the firmware has been installed.
AP-74380 - Revision 1.1