2.2.3
Room conditions
Please protect your cutter from moisture, dust, draughts and direct sunlight (to prevent
possible media detection and epos readout issues). It is best to keep your machine away
from open windows and air-conditioners.
See to it that there is an adequate space around the cutter so that ventilation is not
obstructed.
Avoid unnecessary vibrations and set up your cutter on a level surface.
Be sure to have some free space on each side of the Kona to ease the operating of it.
a = at least 1 meter
b = at least 1 meter
c = at least 1 meter
d = at least 0,2 meter
AP-74380 - Revision 1.1
d
c
Service manual Kona cutting plotter
Product overview
b
a
2
15