Set 3: Method Of Cut - MUTOH ValueJet VJ-1638UR Operation Manual

Set 3: Method of Cut

Set 3: Method of Cut
Note
• When the media detection is set to "Off", the media cannot be cut automatically.
"**>6: Media Initial" P. 67
• Some media may not be cut (cannot be cut at all or cannot be cut finely). In such a case, set the "Output Mode menu" to "Off" and cut the media manually.
"Set 2: Output Mode" P. 70
Cut Pressure menu
Cut : Single Cut - 3 steps
Enter
Sets the media cutting operation after printing.
Setting values
Cut : Single Cut - 2 steps
Cut : Single Cut - 3 steps
Cut : Double Cut - 2 steps
Cut : Double Cut - 3 steps
Sets the media cutting pressure for the cutting operation.
Setting values
Cut Pressure : Low
Cut Pressure : High
Cut with fewer steps than "Single Cut - 3 steps".
Suitable for media with narrow width.
Normal cutting method.
This is the initially set value.
Set when unable to cut with "Single Cut - 2
steps".
Suitable for media with narrow width.
Set when unable to cut with "Single Cut - 3
steps".
Cut the media at low pressure.
Suitable for thin media or if the "High" pressure
setting is too strong.
Normal cutting pressure.
This is the initially set value.

Set 3: Method of Cut

71