4.6.10
Prev. Stick menu
Set up to prevent media from sticking when printing starts.
Note
When the winding unit menu is set to "Type 1" the setting for the Prev. Stick
menu is disabled.
Setup item
Prev. Stick
4.6.11
Media cut menu
Sets the media cutting operation after finishing printing.
Note
When the winding unit menu is set to "Type 1" the setting for the Media cut
menu is set to "OFF".
Setup item
MediaCut
AP-75780 - Revision 1.3
Setting
Description
OFF
Sticking prevention is not performed
The sticking prevention is performed. Feed
<ON>
the media back and forth to prevent sticking.
---
Refer
Setting
Description
The media feed is not performed after
OFF
printing
Feed media to the media cut position after
printing. Use a regular razor blade to cut the
Manual
media.
Refer
---
Refer
User's Guide ValueJet 1304
Handling the printer
ENTER: Saves the settings and shifts to
the previous hierarchy.
cancel: cancels the settings and shifts to
the previous hierarchy.
to:Panel Setup Menu on page 62
to: Cutting media on page 91
ENTER: Saves the settings and shifts to
the previous hierarchy.
cancel: cancels the settings and shifts to
the previous hierarchy.
to:Panel Setup Menu on page 62
4
79