Fujitsu MB90335 Series Hardware Manual page 234

MB90335 Series
[bit11] BRSTIE: Bus reset interruption permission bit
It allows an interrupt due to the interrupt factor for the UDC status register "BRST" to be generated.
BRSTIE
0
1
[bit10] WKUPIE: Wake-Up interruption permission bit
It allows an interrupt due to the interrupt factor for the UDC status register "WKUP" to be generated.
WKUPIE
0
1
[bit9] CONFN: Configuration number display bit
It displays a configuration number. It is updated when setting the interrupt cause for the UDC status
register "CONF".
CONFN
0
1
[bit8] CONFIE: Configuration interrupt enable bit
It allows an interrupt due to the interrupt factor for the UDC status register "CONF" to be generated.
CONFIE
0
1
CM44-10137-6E
Interrupt disabled by BRST factor
Interruption permission by BRST factor
Interrupt disabled by WKUP factor
Interruption permission by WKUP factor
Interrupt disabled by CONF factor
Interruption permission by CONF factor
FUJITSU MICROELECTRONICS LIMITED
CHAPTER 11 USB FUNCTION
11.3 Registers of USB Function
Operating mode
Operating mode
Operating mode
CONFIG Number 0
CONFIG Number 1
Operating mode
213