Fujitsu MB90335 Series Hardware Manual page 228

MB90335 Series
Note:
Setting any number not less than a maximum number of transfer (100
prohibited. Please write "00" in bit8, bit7 about EndPoint2 to EndPoint5. In addition, when using the
automatic buffer transfer mode (DMAE=1), setting bit0 to bit2 in the corresponding EndPoint is
forbidden.
CM44-10137-6E FUJITSU MICROELECTRONICS LIMITED
CHAPTER 11 USB FUNCTION
11.3 Registers of USB Function
or 40 ) and "00
H H
" are
H
207