Table of Contents
Advertisement
MB90335 Series
Notes:
• When the ROM mirror function register has been set, the mirror image data at higher addresses
(FF8000
bank 00.
• For setting the ROM mirror function, see "CHAPTER 20 ROM MIRROR FUNCTION SELECTION
MODULE".
References:
• The ROM mirror function is for using the C compiler small model.
• The lower 16-bit addresses of bank FF are equivalent to those of bank 00. Since the ROM area in
bank FF exceeds 48 Kbytes, however, the mirror image of all the data in the ROM area cannot be
reproduced in bank 00.
• When the C compiler small model is used, the data table mirror image can be shown at "008000
to 00FFFF
ROM area can be referred without declaring the far addressing with the pointer.
CM44-10137-6E
to FFFFFF
) of FF bank is visible from the higher addresses (008000
H
H
" by storing the data table at "FF8000
H
FUJITSU MICROELECTRONICS LIMITED
APPENDIX A Memory Map
to FFFFFF
". Therefore, data tables in the
H
H
to 00FFFF
) of
H
H
H
525
Advertisement
Table of Contents
