4.
Turn the idler wheel (1) over and remove the remain-
ing bearing (2).
5.
Remove the two retaining rings (1) from the idler
wheel (2).
6.
Inspection
Clean all parts in a suitable solvent and allow to air
dry.
7.
Rotate the bearings by hand and check for rough-
ness or binding. Replace as necessary.
8.
Inspect the idler wheel for cracks, damage or exces-
sive wear. Repair or replace as necessary.
9.
Assembly
Install the two retaining rings (1) into the idler wheel
(2).
CROP PROCESSING - RESIDUE HANDLING Straw chopper
2 4/7/2006
K.64.C / 28
4
10011073
5
10011074
6
10011074_1440