Shoe drive system Upper bushing - Disassemble (K.62.B.45.52 -
F.10.A.25)
1.
The cleaning shoe upper gearbox consists of two
case halves, each containing a shaft, gear, shims
and bearings. The repair text will show Disassembly,
Inspection and Assembly for each half of the gear-
box. The gearbox case halves will be designated as
Input, and Output.
2.
Disassembly
Input
Loosen and remove the six retaining bolts (1) from
the gearbox case (2).
Observe the length of the gearbox retaining bolts dur-
ing disassembly.
Separate the gearbox case halves. Remove the
grease from each case half.
3.
Remove the shims (1) between the case halves (2)
and (3).
4.
Loosen and remove the four bolts (1) securing the
end cap (2) to the gearbox case.
Remove the end cap (2) from the gearbox case.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 16
2 4/7/2006
1
20014973
2
20015003
3
20014974