Return auger - Install (K.62.C.53 - F.10.A.15)
1.
Installation
Place the auger into the mounting position on the
combine.
Secure the cradle support to the cross auger housing
with the two nuts and bolts (1) Leave the bolts hand
tight at this time.
2.
Install the bolt (1) into the head end of the auger tube.
Leave the bolt hand tight at this time.
3.
Install the three bolts and nuts (1) into the head end
of the auger tube. Leave the bolts hand tight at this
time.
Install the support (2) and secure with the mounting
hardware (3) Tighten the hardware securely.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 43
1
40015061_1297
2
40015062_1298
3
40015063_1299