7.
Slide the nylon bushing (1) spring gauge (2) spring
(3), washer (4) onto the adjusting rod. Turn on the
adjusting nut (5).
8.
Install the drive belts (1) Tighten the adjusting nut (2),
until the washer is even with the top of the spring
gauge.
9.
Attach the belt guard (1) to the combine. Turn the
three 1/4-turn fasteners (2) one-quarter turn to en-
gage them to the support braces.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 51
7
20013922
8
20013917_1320
9
20013916_1321