4.
Loosen and remove the nuts and bolts (1) from the
rear, fan guard bracket (2) on the left side of the
cleaning fan. Repeat for the opposite side.
NOTE: The fan guard is heavy. Use a suitable means of
support, such as a floor jack, below the fan guard when
removing the hardware from the mounting brackets.
5.
Loosen and remove the bolts (1) from the front, fan
guard bracket (2) on the left side of the cleaning fan.
Repeat for the opposite side.
6.
Lower the floor jack (1) and fan guard (2) Remove
the fan guard from under the cleaning fan assembly.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 110
2 4/7/2006
4
20013156
5
20013157
6
20013158