Return auger drive system Gearbox - Assemble (K.62.C.43.46 -
F.10.A.20)
1.
Input
Install the metal seal (1) and sealed bearing (2) onto
the end of the input shaft.
2.
Place the gear (1) into the gearbox case.
3.
Insert the input shaft (1) through the gearbox case
and gear.
Seat the gear over the key in the shaft and against
the inside of the gearbox case.
Insert the metal seal (2) over the shaft and into the
gearbox case.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 24
1
20015094
2
20015095
3
20015096