New Holland CX720 Repair Manual page 3816

10. Engage the leveling frame (1) to the positioning mo-
tor at (2).
11. Install cap screws, two washers and a lock nut at (1)
on both sides of the grain pan (2).
Do not tighten the hardware until instructed to do so.
12. Release the lock on the eccentric shaft. Rotate the
shaft until the grain pan is at it's front dead point.
Adjust the right side of the pan until a distance of 12 -
16 mm (472 - 630 in ) is obtained between the tab on
the leveling frame at (1), and the forward most point
of the grain pan (2).
Tighten all grain pan hardware.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 104
2 4/7/2006
10
40013964
11
50013946_1207
12
40015724