4.
Remove circlip (4) and the shims.
Remove circlip (9).
Remove shims (8) and spacer (7).
To remove pre-assembled shaft (15), install the
sprocket or the hub with the bolt to pull out the shaft.
5.
Remove bearing (3) and spacer (2).
Remove bearing (1). Carefully take away the inner
ring with a bearing puller, make sure not to damage
the shaft.
6.
Take out spacer (5) and shims (6).
CROP PROCESSING - STORING AND HANDLING Grain storing
2 4/7/2006
K.60.B / 8
4
ZDA3530A
5
ZDA3539A
6
ZDA3531A