Return auger Paddle - Replace (K.62.C.53.20 - F.10.A.30)
1.
Right Auger Bearing Replacement
Remove the access door from the side of the auger
discharge.
Turn off cap screw (1) and remove the speed sensor
cam (2).
2.
Loosen set screw (1) Disengage the bearing lock col-
lar (2).
Remove nuts and carriage bolts (3) Hang the speed
sensor (4), so that it is out of the way.
3.
Lift the bearing and retainers (1) from the shaft.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 56
1
40013923
2
40013924
3
40013925