New Holland CX720 Repair Manual page 3838

Fan Deflector - Adjust (K.62.B.52.76 - F.45.A.01)
1. After the cleaning fan housing is installed in the com-
bine, the position of the deflector plates must be
checked. Use the tables provided for adjustment in-
formation.
Loosen the deflector plate mounting bolt (1) and ad-
justment bolt (2) on both sides of the fan housing.
Model
5 straw walkers- 354 mm
cleaning shoe
6 straw walkers- 514 mm
cleaning shoe
2. Position the deflector plate to correspond with the
correct measurements for the specific machine
shown in the table, and tighten the adjustment bolt
and mounting bolt.
Re-check the measurement. If the measurement is
correct, tighten the adjustment bolt and mounting bolt
on the opposite side.
Follow the same procedure for adjustment of the
short deflectors, as referenced in the table as X1 and
X2.
3.
CROP PROCESSING - CLEANING Primary cleaning
X1 X2
356 mm
538 mm
1
20013147
X4
68 mm
68 mm
2 4/7/2006
K.62.B / 126
X5
42 mm 10 mm
42 mm 10 mm
X6
2
20015611
3
20015610