4.
Install a new seal (1) into the gearbox case.
Lightly grease the ID of the new seal with NLGI 2
grease.
5.
Fill the cavity above the seal with NLGI 2 grease and
install the cap (1) until seated in the gearbox case.
6.
Install the output shaft (1) through the cap, seal and
bearings.
Tap or press the shaft until seated on the bearings.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 22
4
20015079_1322
5
20015083
6
20015084