Cross auger drive system - Install (K.62.C.41 - F.10.A.15)
1.
Grease the ID of the safety clutch (1) with NLGI 2
grease, and install onto the input shaft (2) making
sure to align the roll pin holes.
2.
Install the key (1) into the tapered end of the input
shaft (2).
Install both roll pins (3) through the safety clutch (4),
and input shaft (2).
3.
Install the drive sheave (1) onto the input shaft and
secure with the flat washer (2) and bolt (3) Tighten
the bolt securely.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 9
1
40015049_1336
2
40015048_1337
3
40015046_1338