New Holland CX720 Repair Manual page 3744

4. Disengage the adjusting arms from the left and right
sieves at (1), (left side shown).
Turn out three cap screws (2) and slide the lower
sieves from the combine.
Place jacks under the cleaning shoe on the side to
be repaired. Support the weight of the shoe with the
jacks.
NOTE: Optional remotely operated sieves only.
NOTE: All models.
5. Carefully turn out the five cap screws at (1) or (2).
NOTE: Turning out the five cap screws, 1 or 2, will detach
the lower cleaning shoe from the supporting frame. Per-
sonal injury can result if the cleaning shoe is not properly
supported.
NOTE: Additional items may be shown removed to better
illustrate this step.
6. Turn out two cap screws (1) Remove the lower con-
necting arm bushing cap (2) and mounting plate (3)
from the combine.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 32
2 4/7/2006
4
50013944_1227
5
50015725_1237
6
40015728