New Holland CX720 Repair Manual page 3748

4. Install the four mounting bolts (1) securing the LH
bearing housing (2) to the frame. Tighten the bolts
securely.
5. Install the four mounting bolts (1) securing the RH
bearing housing (2) to the frame. Tighten the bolts
securely.
Install the parallel key (3) into the eccentric shaft.
IMPORTANT: Be sure to install the chamfer side of the
parallel key in the eccentric shaft.
6. Position the RH connecting rod (1) onto the eccen-
tric shaft (2) aligning the key way with the parallel
key. Push the connecting rod onto the shaft until the
eccentric block is fully seated on the shaft.
Rotate the eccentric shaft until the key slot (3) in the
eccentric block is perpendicular to the axis of the con-
necting rod.
IMPORTANT: Connecting rods must be assembled with no
axial or longitudinal stress.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 36
2 4/7/2006
4
20013199
5
20013200
6
20013205