New Holland CX720 Repair Manual page 4032

Return auger - Remove (K.62.C.53 - F.10.A.10)
1. Removal
Turn the three 1/4-turn fasteners (1) to disengage
them from the support braces. Lift off the belt guard
(2).
2. Turn off the adjusting nut (1) from the belt tensioner.
Slide the washer, spring gauge, spring and lower ny-
lon bushing from the adjusting rod. Remove drive
belts (2).
3. Remove cap screws and nuts at (1).
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 40
1
20013916
2
20013917
3
20013919