New Holland CX720 Repair Manual page 3750

Shoe drive system Upper gearbox - Install (K.62.B.45.46 - F.10.A.15)
1. Press the rocker arm mounting flange (1) onto a new
metal-cased rubber bushing (2) until the bottom of
the flange is 5.5 - 6.5 mm (7/32 - 1/4 in) from the
bottom of the center metal insert of the bushing.
2. Orient the flange bushing assembly so that the rocker
arm will be at a 78 degree angle when attached.
NOTE: The left side is shown, the right side will be oppo-
site.
3. Press the flange bushing assembly (1) onto the pivot
pin (2) until the top of the flange is 35 - 37 mm (1-3/8
- 1-7/16 in ) from the top of the mounting plate.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 38
2 4/7/2006
1
40015722_1229
2
40015721_1230
3
40015722_1231