New Holland CX720 Repair Manual page 3628

7. Remove grease line (9) by unscrewing nut (10).
Remove cover (8) by loosening the three bolts.
8. Remove ring (7) from the shaft.
Loosen four bolts (6) of the bearing housing.
Install two threaded rods (metric 16, quality 8.8) and
remove the bearing housing, using a puller.
CROP PROCESSING - SEPARATING Straw flow beater
2 4/7/2006
K.42.F / 10
7
ZDA4435B
8
ZDA4478A