New Holland CX720 Repair Manual page 3629

Drum Left hand bearing - Remove (K.42.F.52.12 - F.10.A.10)
Prior operation:
Remove the drum variator drive disks from the straw flow beater shaft (refer to Drum variator Drive disc - Remove
(K.40.B.43.50 - F.10.A.10)).
1. Remove key (1) and ring (2).
Remove grease line (3).
Remove four bolts (4).
2. Install two threaded rods (metric 16, quality 8.8) and
remove the bearing housing, using a puller.
3. Remove the ring from the shaft.
4. Remove circlip (1), ring (2), the seal ring and bearing
(3) from bearing housing (4).
NOTE: The feltring will be damaged when it is removed.
IMPORTANT: A new feltring must be steeped with engine
oil before installation.
CROP PROCESSING - SEPARATING Straw flow beater
2 4/7/2006
K.42.F / 11
1
ZDA4434A
2
ZDA4725A
3
ZDA4726A