New Holland CX720 Repair Manual page 3803

Upper shoe Arm - Remove (K.62.B.51.50 - F.10.A.10)
1. The upper cleaning shoe uses two movable support
arms to attach the shoe to the frame. The support
arms (1) are located toward the rear of the combine,
close to the lower shoe support arms (2).
The two grain pan support arms are located toward
the front end of the combine.
The lower cleaning shoe uses two support arms (2)
to attach the shoe to the frame.
All six support arms are similar in construction, only
one set of removal instructions is given.
2. Disconnect the support arm (1) by removing clamps
and hardware at (2).
NOTE: Lower cleaning shoe support arm removal is
shown, the others are similar.
NOTE: Depending on the support arm being removed, it
may be necessary to rotate the leveling frame to obtain ac-
cess to the clamping hardware. Disengage the shoe posi-
tioning motor and rotate the frame as required.
3. Remove the snap rings (1) and washers (2) from the
support arm.
NOTE: The upper shoe support arms do not have washers
and snaps rings.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 91
2 4/7/2006
1
20013949_1218
2
20013949_1219
3
20013963