7.
Install the spacer (1) onto the output shaft (2).
8.
Install the locking washer (1) onto the output shaft
(2).
9.
Install the nut (1) onto the output shaft (2).
Use a torque wrench to tighten the nut (1) to obtain
1.5 - 3 N·m (13 - 26 lb. in.) of rolling torque.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 53
2 4/7/2006
7
20014990
8
20014989
9
20015002