New Holland CX720 Repair Manual page 4030

13. Remove the bolts (1) securing the support rail (2)
Remove the support rail from the combine.
14. Cut the plastic wire ties (1) and disconnect the paddle
sensor connector (2).
15. Loosen and remove the four nuts (1) and washers,
(two in front, two in rear), securing the auger tube to
the cross auger housing.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 38
13
40015058
14
40015059
15
40015060