New Holland CX720 Repair Manual page 3836

4. Place a floor jack (1) under the fan guard (2) and
raise the guard into the mounting position.
NOTE: The fan guard is heavy. Use a suitable means of
support, such as a floor jack, below the fan guard during
installation of the guard to the cleaning shoe frame.
5. Install the two mounting bolts (1) through the front,
fan guard bracket (2) and frame on the left side of
the cleaning fan. Repeat for the opposite side.
6. Install the two mounting bolts and nuts (1) through
the rear, fan guard bracket (2) and frame on the left
side of the cleaning fan. Repeat for the opposite side.
Tighten all of the fan guard mounting bolts and nuts
securely.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 124
2 4/7/2006
4
20013158
5
20013157
6
20013156