New Holland CX720 Repair Manual page 4036

4. Install and tighten the four washers and nuts (1) to
secure the auger tube to the mounting brackets.
Securely tighten all mounting hardware previously
left hand tight.
5. Connect the paddle sensor wire connector (1) and
secure the wire with plastic wire ties (2).
6. Install the main hydraulic hose brackets (1) and se-
cure with the bolts (2) Tighten the bolts securely.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 44
4
40015060
5
40015059_1300
6
40015056_1301