New Holland CX720 Repair Manual page 3777

4. Turn the eccentric drive shaft until the drive arm is on
the lowest leg of travel. Position the shaft key and
centerline of the drive arm perpendicular (90 degree
angle) to each other. This is known as the neutral
position.
Lock or hold the shaft in the neutral position until
instructed to release it.
Tighten the hardware for the drive or connecting arm
bushing caps.
Release the lock or hold from the eccentric drive
shaft.
5. The sieves with welded tabs (1) are manufactured to
be installed on the left side of the shoes.
NOTE: Optional remotely operated sieves only.
6. Slide the appropriate sieves onto the lower shoe. Se-
cure the sieves into place using the previously re-
moved hardware (1).
Attach the positioning mechanism (2).
NOTE: Optional remotely operated sieves only.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 65
2 4/7/2006
4
20013967_1224
5
40015723
6
50013944_1233