New Holland CX720 Repair Manual page 4031

16. Loosen and remove the two bolts, and nuts (1) secur-
ing the cradle support to the cross auger housing.
17. Loosen and remove the bolt (1) from the paddle end
of the auger housing.
18. Loosen and remove the three bolts and nuts (1) from
the paddle end of the auger housing.
Remove the mounting hardware (2) from the support
(3) Remove the support (3) from the combine.
Remove the auger from the combine.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 39
16
40015061
17
40015062
18
40015063