13.
Loosen and remove the nuts (1) and the bearing (2)
from the LH end of the fan shaft.
Remove the paint from the fan shaft to ease removal.
14.
Carefully pull the fan shaft (1) from the right side of
the fan.
NOTE: A small amount of oil or grease may be applied to
the fan shaft to ease removal from the fan.
15.
Inspection
16.
Clean all parts in a suitable solvent and allow to air
dry.
17.
Inspect the fan shaft for nicks, burrs, or other dam-
age. Repair or replace if necessary.
18.
Inspect the bearings for smooth operation. If bearing
rotation is rough or tight, replace with new bearings.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 113
2 4/7/2006
13
20013173
14
20013171