Return auger drive system Gearbox - Remove (K.62.C.43.46 -
F.10.A.10)
1.
Removal
2.
Remove the snap ring (1) and washers (2) from the
input shaft.
NOTE: LH side shown. Use same procedure for the RH
gearbox removal.
3.
Use a suitable puller to remove the pulley (1).
4.
Remove the key (1) and washers (2) from the input
shaft.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 16
1
40015064
2
40015065
3
40015066