10.
When the proper rolling torque has been set, bend
the locking washer (1) to secure the nut (2).
11.
Install the shims (1) onto the gearbox case (2) or (3).
Check and adjust backlash. See Shoe drive sys-
tem Upper gearbox - Backlash (K.62.B.45.46 -
F.45.A.11).
Apply a 1/8 in bead of RTV gasket eliminator to the
mating surfaces of both case halves.
12.
Install the six mounting bolts (1) to assemble the two
halves of the gearbox (2).
Tighten the six mounting bolts (1) securely.
NOTE: Be sure to use the correct length bolts in the proper
position when assembling the gearbox case halves.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 54
2 4/7/2006
10
20014988
11
20015003
12
20014973