4.
Set the pivot plate against the frame.
If installing the left pivot plate, secure the plate using
four previously removed cap screws and lock wash-
ers (1).
If installing the right pivot plate, tighten the hardware
only enough to hold the plate steady.
NOTE: Right side shown. Left side is similar.
5.
Turn in adjusting cap screw (1) until it is seated tight
in the plate (2) Set the plate into its previously know
position by turning nuts (3) and (4). Tighten all hard-
ware.
NOTE: Right side shown.
6.
Install the previously removed cap screws and lock
washers (1).
Remove the jacks that were supporting the cleaning
shoe.
NOTE: The shoes are being supported by jacks. Personal
injury can result if the cleaning shoe is not properly sup-
ported.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 39
2 4/7/2006
4
40015720_1228
5
40015720_1232
6
40015719