New Holland CX720 Repair Manual page 4019

Return auger drive system Gearbox - Disassemble (K.62.C.43.46 -
F.10.A.25)
1. Output
Loosen and remove the four bolts (1) in the gearbox
housing.
NOTE: The returns auger gearbox consists of two case
halves, each containing a shaft, gear, shims and bearings.
The repair text will show Disassembly, Inspection and As-
sembly for each half of the gearbox. The gearbox case
halves will be designated as Input, and Output.
2. Separate the gearbox halves (1) from each other.
NOTE: Observe the orientation of the six auger tube
mounting holes during separation of the gearbox halves.
This is important during installation of the gearbox onto
the auger.
3. Use a suitable puller to remove the output gear (1)
from the output shaft (2).
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 27
1
20015071
2
20015072
3
20015073