New Holland CX720 Repair Manual page 3809

14. Turn out cap screws (1) several turns. Apply blows
using a mallet to the head of the cap screws to force
the bushings and pins from the upper shoe frame.
Continue until the pins can be removed from the
frame.
At this point, the front of the cleaning shoe is sup-
ported by the wood blocks (2) previously set in place.
15. Rotate the leveling frame to make the right side ac-
cessible. Turn out the cap screws from the upper
shoe frame right support arm bushing cap (1) Re-
move the support arm (2).
Rotate the leveling frame to make the left side acces-
sible. Turn out the cap screws from the upper shoe
frame left support arm bushing cap.
16. Several individuals should be used to remove the
upper cleaning shoe frame from the combine.
With all points disconnected, lift and pull the upper
cleaning shoe frame (1) from the machine.
NOTE: The upper cleaning shoe frame is heavy and awk-
ward. The rake is still attached to the grain pan. Exercise
extreme caution while removing the cleaning shoe frame.
Severe personal injury can result while removing the upper
shoe frame.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 97
2 4/7/2006
13
20013950
14
20013949
15
50013951